Fast, Reliable Gate Parts & Welding Across Hillsborough
Gate parts and welding in Hillsborough, CA typically runs $280-$850 depending on the repair, with most hinge replacements and rail repairs completed in a single visit. Our Gate Parts & Welding team serves Hillsborough estates with same-day response and no-hassle upfront pricing settled before we touch a single bolt.
We’ve been driving to Hillsborough since 1984. Forty-two years of winding up Trousdale Drive, past the mature oak canopy on Carolan Avenue, and through the fog line that sits on west-facing gates along the upper slopes. Hillsborough isn’t like Burlingame or San Mateo. There are no strip malls, no apartment complexes, no standard-issue aluminum driveway gates ordered from a catalog. Every property is a custom estate on a large lot with a long setback driveway, and nearly every one of those driveways is guarded by a wrought iron or ornamental steel gate that was fabricated specifically for that home. When those gates break, you can’t swap in a part from Home Depot. You need a technician who can weld, fabricate, and source obsolete components. That’s what we do.
A live person answers our phone 24 hours a day, 7 days a week. Call (866) 977-5773 for a free estimate.
Why Ironworks Gate Co. of San Jose Is Hillsborough’s Preferred Gate Parts & Welding Company
Hillsborough homeowners know their gates. Many have lived in the same 1920s Spanish Colonial or 1950s mid-century modern for thirty or forty years. They’ve watched three or four gate companies come through, and they remember the ones who left a mess or disappeared when the weld cracked six months later. We’ve been the company that stays.
Our reviews from Hillsborough customers consistently mention the same things: we show up when we say we will, we explain the repair before starting, and we leave the stone pillar and driveway clean. One customer on Skyfarm Drive told us we were the first company in fifteen years who didn’t try to sell her a complete gate replacement when her hinges needed welding.
Response time to Hillsborough is typically same-day or next-morning. We’re based in San Jose, but our technicians are on the Peninsula daily. We know the local conditions that affect your gate: the marine fog that rolls in off the Bay and deposits moisture on west-facing frames year-round, the mature tree canopy that keeps shaded gates damp enough to seize latch bolts, and the custom pillar housings built in the 1990s that don’t accept modern operators without fabrication work.
We stand behind every job with our 90-Day Done Right Promise, known internally as the Keystone Standard. Written guarantee. No paperwork. No arguing. If it’s not right, we come back and make it right.
Our Gate Parts & Welding Services in Hillsborough
Hinge Replacement
Hillsborough’s marine fog is hard on hinges. Gates facing west toward the Bay, especially those along the upper reaches of Trousdale or on properties with ocean views, collect moisture on their frames daily. The result is rusted barrel hinges, seized pin hinges, and weld joints that crack from repeated stress on corroded metal. We remove the old hinge, clean the mounting surface, and weld in a replacement that matches the original specifications. For gates with stone or masonry pillars, we often need to fabricate a custom bracket to maintain proper alignment without damaging the pillar face. A typical hinge replacement in Hillsborough runs $280-$450.
Post Replacement
Gate posts on Hillsborough estates take a beating. Soil movement on the hillside lots common along the western edge of town, combined with decades of gate weight and occasional vehicle contact, leaves posts leaning or rotted at the base. We replace steel posts with proper depth and concrete footing, or fabricate custom post brackets when the original mounting was integrated into a stone pillar. Most post replacements in Hillsborough fall between $480-$780 depending on footing depth and whether we need to match existing custom metalwork.
Rail Repair
The horizontal rails on ornamental iron gates fatigue over time. We’ve repaired rails on gates from the 1940s in the older estates near El Cerrito Avenue and from the 1970s in the mid-century neighborhoods off Skyline Boulevard. Rail repair requires matching the original profile, cutting out the damaged section, and welding in new stock with a finish that blends with the patina of the existing gate. Typical rail repair in Hillsborough: $320-$580.
Custom Welding & Fabrication
This is where Hillsborough work diverges from standard gate repair. Nearly every Hillsborough estate has a gated, long-driveway setup with custom ornamental iron or steel gates, meaning gate parts here often require custom fabrication or sourcing from specialty suppliers due to the age and uniqueness of the installations. We fabricate mounting brackets, repair scrollwork, extend gate frames, and build custom catch plates. Our mobile welding rigs let us work on-site, which matters when a gate is too large or too integrated into its pillar housing to remove. Custom welding projects in Hillsborough typically range from $350 for simple bracket fabrication to $850 or more for extensive scrollwork repair or operator mounting adaptation.
Gate Rollers
Sliding gates on Hillsborough’s long driveways rely on rollers that take constant use. Moisture from fog and shaded canopy causes bearing failure and flat-spotting. We stock heavy-duty V-groove and cantilever rollers, and we can fabricate custom roller brackets when the original mounting has corroded away. Roller replacement in Hillsborough generally runs $240-$420.
Latch & Lock Repair
Magnetic locks, mechanical latches, and electric strikes on Hillsborough gates fail from corrosion, misalignment, or obsolete electronics. We repair or replace the mechanism and can integrate new access control hardware with existing automation systems.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hillsborough
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Hillsborough homeowners, this matters because many estates run older European operators, particularly BFT and FAAC systems installed in the 1990s and early 2000s. We stock common parts for these brands and maintain supplier relationships for obsolete components. When the original circuit board is discontinued, we have the electrical and fabrication skills to retrofit a modern operator into your existing custom pillar housing without destroying the aesthetic. Most brand-specific repairs in Hillsborough are completed in one visit.
Common Gate Parts & Welding Problems We See in Hillsborough Homes
- Corrosion of weld joints and hinges on west-facing gates. The persistent marine fog from the Bay deposits moisture on metal frames year-round, accelerating rust far faster than in drier inland Peninsula cities. Hinges and weld joints on gates facing west or exposed along the upper slopes are typically the first to fail.
- Seized latch bolts and rollers under shaded tree canopy. Hillsborough’s mature oak and redwood canopy keeps driveways beautiful but traps moisture. Latch bolts and gate rollers on shaded gates seize repeatedly, requiring either more frequent maintenance or upgraded hardware with better corrosion resistance.
- Obsolete circuit boards in 1990s-2000s BFT and FAAC operators. Many automated gate operators installed during that era are now obsolete brands with discontinued logic boards. A “simple” opener repair often requires sourcing legacy components or retrofitting a modern operator into a custom-pillar housing built decades ago.
- Custom pillar housings that don’t accept standard replacement parts. The stone and masonry pillars common on Hillsborough estates were built around specific operators. Swapping in a new unit without fabrication work usually means chipping stone or leaving an ugly gap. We fabricate custom mounting solutions instead.
We recently serviced a 1930s English Tudor estate on El Cerrito Avenue in Hillsborough where the 25-year-old FAAC operator had a failed circuit board. Since the original board was discontinued, we fabricated a custom mounting bracket to retrofit a new LiftMaster operator into the existing stone pillar housing, preserving the estate’s aesthetic.
Pricing for Gate Parts & Welding in Hillsborough, CA
| Service | Typical Range in Hillsborough |
|---|---|
| Hinge Replacement (per hinge) | $280 - $450 |
| Gate Roller Replacement | $240 - $420 |
| Rail Repair (per section) | $320 - $580 |
| Custom Welding / Fabrication | $350 - $850+ |
| Post Replacement | $480 - $780 |
| Latch / Lock Repair | $180 - $340 |
What moves the price? Three things: access to the gate, the extent of corrosion damage, and whether custom fabrication is needed to match existing metalwork or fit a modern part into an older housing. We settle on an upfront price before we start. No surprises on the bill. Every repair over $250 qualifies for our $50 discount, and we always offer a free second opinion on any written estimate you’ve received from another company. Call (866) 977-5773 for an exact quote - estimates are free.
We Also Serve Cities Near Hillsborough
Our service area covers the full Peninsula. We regularly perform gate parts and welding work in Burlingame, San Mateo, Belmont, and Foster City. The conditions vary by city - drier inland climate in Belmont, different housing stock in Foster City - but our approach stays the same: diagnose correctly, fabricate what can’t be bought, and stand behind the work.
Serving Hillsborough, CA - Our Local Coverage Area
We’re based in the Hillsborough area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hillsborough
Yes. We cut out the corroded hinge, clean the mounting surface, and weld in a replacement that matches your gate’s original specifications. For gates on stone or masonry pillars, we often fabricate a custom bracket to maintain proper alignment without damaging the pillar. The job typically takes two to three hours and costs $280-$450. Call (866) 977-5773 for a free estimate.
You have two options: source a legacy circuit board through our specialty suppliers, or retrofit a modern operator into your existing pillar housing. We usually recommend the retrofit. It gives you current parts availability and warranty coverage while preserving your estate’s aesthetic. We fabricate custom mounting brackets on-site to make the new operator fit the old housing. Most retrofits run $650-$1,200 depending on operator model and fabrication complexity. Call (866) 977-5773 to discuss which path makes sense for your gate.
Yes. We stock heavy-duty V-groove and cantilever rollers, and when the original mounting bracket has corroded away, we fabricate a replacement that matches your gate’s geometry. The roller itself is rarely the hard part on a 40-year-old gate. It’s the bracket, the axle, and the alignment after decades of settling. We handle all of it. Typical roller replacement in Hillsborough: $240-$420. Call (866) 977-5773 for an exact quote.
We typically reach Hillsborough same-day or next-morning. A live person answers our phone 24 hours a day, 7 days a week, and we prioritize stuck-open gates as a security concern. We’ll give you an honest arrival window and call when we’re on the way.
It is written, not verbal. There is no paperwork to file, no arguing, no exceptions. If something we repaired isn’t right, we come back and make it right. That’s the Keystone Standard, and it applies to every gate job we do in Hillsborough, whether it’s a $240 roller replacement or an $850 custom fabrication project.
Ready to get your gate working right? Call Ironworks Gate Co. at (866) 977-5773 for a free estimate. We’ll be there when we say, we’ll give you a square deal with upfront pricing and no surprises on the bill, and we’ll stand behind the work in writing. Senior and veteran discounts of 5% are always available, and our $89 Seasonal Tune-Up can catch problems before the fog season makes them worse.
Written by Rick Almendarez, Owner at Ironworks Gate Co., serving Hillsborough since 1984.